Please use our website in portrait format.

CAD/CAM/PPS Software for MicroStep machines

MSF Compact • MasterCut • WaterCut | Fully automatic unfolding, nesting, lasering, plasma- & oxycutting

MicroStep has a long tradition in the production of high quality laser, water, plasma and oxyfuel cutting machines.

WiCAM developed the first postprocessors for MicroStep machines already in the early 2000s.

Today hundreds of MicroStep machines produce and communicate with the PN software of WiCAM.

Especially the PPS-connectivity, the common cuts and the combination with any production method of other manufacturers enable our customers with MicroStep machines already today integrated ‘Next-Level’ automation solutions.

Factsheet Get a Demo



| Harm Dunnink, Managing Director of Dulasta:

“Special features such as bevel cutting, common cut and part marking are an integral part of the automatic programming chain. The part preparation is manufacturer independent, so that changing machines and cutting technology does not cause any time delay.Right after the production process, PN4000 transmits the real-time data for the release of the further production steps and for post-calculation to the ERP system.”

Success Story


WiCAM software solution in 60 seconds!

CAD/CAM Software Solution for MicroStep machines

The manufacturer-independent CAD/CAM/Nesting system for all well-known machines – and all PPS/ERP and CAD systems. Control your machinery IT-integrated, fully automatic – and, if desired, decentralized. The powerful solutions of WiCAM ensure maximum productivity today and create the flexibility for the challenges of tomorrow.


PN4000 is the CAD / CAM / Nesting system for PPS / ERP-driven programming of CNC cutting, punching and portal milling machines of all kinds. The various modules and interfaces enable flexible job shop manufacturing, up to unmanned fully automated, industrial process chains.

Basic Functions

  • Cross-module data flow
  • Concept and detaile functions completely automatable
  • Manual changes at the component and on the nesting at any time
  • Optimizer for shortest moving distances and process times
  • Free definable macros
  • Nesting of any geometries

Oxyfuel / Plasma

Special functions are available for oxyfuel and plasma systems. For example, bevel information can be interpreted in CAD and automatically converted into correct processing.


Lasern automates the programming of laser systems. The application has material and sheet thickness-dependent databases. Complex geometry shapes, contour sizes, labeling and special machining of a component are automatically detected and processed optimally.


For waterjet systems the following functions are available.


  • Automatic contour cutting with leadin/-out, with collision control
  • Automatic recognition of different cutting qualities and parameters
  • Support of multi-burner units

our Software Products

CAD/CAM Automation


CADCAM/Nesting solution for ERP/PPS controlled CNC cutting, punching, shearing, milling and combined machining – manual to fully automatic.

Order Management


Order management, detailed planning, production feedback and monitoring of deadlines and production.



Unfolding, bend simulation and offline programming of CNC press brakes from various manufacturers.



Online unfolding, calculation, CAD and NC format conversion, parametric component creation.

The creation of holistic automation solutions based on CAD and order data has always been one of WiCAM’s core competencies.

This includes communication with various solutions of warehouse systems, transport logistics, order systems, calculation programs, etc.

Especially the ERP / PPS connectivity provides our customers with holistic next level automation solutions – from raw materials through production and delivery to post-calculation and analysis.

Supported Machines

PN4000 - CAD/CAM Automation - Supported Machines MicroStep


MSF Compact  •  MSF  •  MSF Max


MasterCut Compact  •  MasterCut  •  MG  •  DRM  •  DS






Technische Software

Reetzstraße 46c
76327 Pfinztal-Söllingen

Phone: +49 7240 9259-0


WiCAM at Schweissen & Schneiden 2023

From 11 to 15 September 2023, WiCAM will be presenting its current range of CAD/CAM nesting software at Schweissen & Schneiden …

WiCAM Foundation invests in education

We are pleased to inform you today that this year the WiCAM Foundation has decided to award a total of 45 Germany Scholarships at Germany’s most prestigious university.